TP-Link TL-WR743ND User Guide - Page 35
Operation Mode, TL-WR743ND, AP Client Router, AP Router
UPC - 845973051556
View all TP-Link TL-WR743ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
TL-WR743ND 150Mbps Wireless AP/Client Router ) Note: The default PIN code of the Router can be found in its label or the QSS configuration screen as Figure 4-3. c). You will see the following screen when the new device successfully connected to the network. ) Note: 1. The QSS LED on the Router will light green for five minutes if the device has been successfully added to the network. 2. The QSS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is enabled before configuring the QSS. 4.5 Operation Mode The Router supports two operation mode types, AP Client Router and AP Router. Please select one your want. Click Save to save your choice, which is shown as Figure 4-5. Figure 4-5 Operation Mode ¾ AP Client Router: In this mode, the device enables multi-users to share Internet from WISP. The devices on LAN ports share the same IP from WISP through wireless WAN port. At the same time, local wireless access is supported and the Ethernet WAN port is disabled. ¾ AP Router: In this mode, the device enables multi-users to share the Internet via ADSL/Cable Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless - 28 -