TP-Link TL-WR743ND User Guide - Page 61
DHCP, 4.8.1 DHCP Settings
UPC - 845973051556
View all TP-Link TL-WR743ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
TL-WR743ND 150Mbps Wireless AP/Client Router ) Note: This page will be refreshed automatically every 5 seconds. 4.8 DHCP Figure 4-29 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 4-29), DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. 4.8.1 DHCP Settings Choose menu "DHCP → DHCP Settings", you can configure the DHCP Server on the page as shown in Figure 4-30.The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router on the LAN. Figure 4-30 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.1.100 is the default start address. - 54 -