Toshiba 20VL43U Owners Manual - Page 8

Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. From antenna or Cable VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO LR IN OUT Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have an S-VHS VCR, use an S-video cable (in the S-video jacks) instead of the regular video cable. Connecting your TV Back of TV Connecting a cable converter box This connection allows you to watch basic and premium cable channels. Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. Back of TV Note: When you use a converter box with your TV, the channel selection feature does not operate. From Cable Cable converter box IN OUT Connecting a cable converter box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Set the TV signal source to VIDEO 1(page 22). Tune the VCR to channel 3 or 4 (the same channel as the converter box output switch), and use the cable converter box to change channels. From Cable VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO LR IN OUT IN OUT Cable converter box Back of TV Note: When you use a converter box with your TV, the channel selection feature does not operate. If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have an S-VHS VCR, use an S-video cable instead of a standard video cable. The TV side panel can be used to connect a VCR or other video equipment. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 8