Toshiba 20VL43U Owners Manual - Page 9

Connecting your TV Connecting a DVD player or satellite receiver E and a VCR This connection allows you to watch DVD/satellite, VCR, or TV F programs. You can record from the satellite receiver or TV. You can also record one TV channel while watching another channel. S Note: If your DVD player has component video connections, see "Connecting a DVD player with ColorStream® (component video) and a VCR on page 10. You will need: Introduction • one coaxial cable • one set of A/V cable • one pair of audio cables • one S-video cable (between the TV and DVD player/satellite receiver) From Antenna Stereo VCR IN from ANT OUT to TV CH 3 CH 4 Back of TV VIDEO AUDIO LR IN OUT Side of TV Note: To watch a DVD /satellite program, the TV must select VIDEO 1; to watch a VCR program, the TV must select VIDEO 2 (see page 22). You can use a standard video cable instead of an S-video cable between the TV and DVD player/satellite receiver, but the picture quality will decrease. The illustration at left shows one S-video cable and one pair of audio cables connected from the DVD player/satellite receiver to VIDEO 1 on the TV. * From Satellite Dish DVD/Satellite receiver IN from ANT S-VIDEO VIDEO OUT OUT AUDIO OUT L R * Satellete receiver use only The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Using the Remote Control Setting up your TV Using the TV's Features Appendix Index 9