Toshiba 42HP95 Owner's Manual - English - Page 107
Appendix - weight
View all Toshiba 42HP95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
11 Appendix Specifications NOTE: • This model complies with the specifications listed below. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. Television System NTSC standard ATSC standard (8VSB) Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted*) *Encrypted channels can be viewed on this TV using a CableCARD.™ See page 13 for details. Channel Coverage VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 135) Video/Audio Terminals (continued) HDMI™ INPUT: HDMI compliant (type A connector) HDCP compliant E-EDID** compliant Suggested formats: 1080i, 480p, 480i, 720p HDMI Audio: 2-channel PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample PC INPUT: 15-pin D-sub Analog RGB PC AUDIO INPUT: 3.5 mm stereo mini jack Power Source 120 V AC, 60 Hz Power Consumption 42HP95: 337 W (average) 57 W in standby mode (Using a CableCARD™) 53 W in standby mode (Without a CableCARD™) 50HP95: 407 W (average) 57 W in standby mode (Using a CableCARD™) 53 W in standby mode (Without a CableCARD™) Audio Power 10 W + 10 W Speaker Type Main: Four 2-3/8 × 4-3/4 inches (60 × 120 mm) Tweeter: Two 1-1/4 inches (32 mm) round Video/Audio Terminals S-VIDEO INPUT: Y : 1 V(p-p), 75 ohm, negative sync. C : 0.286 V(p-p) (burst signal), 75 ohm VIDEO/AUDIO INPUT: VIDEO: 1 V(p-p), 75 ohm, negative sync. AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k ohm or greater) ColorStream® (component video) HD INPUT: Y : 1V(p-p), 75 ohm PR: 0.7 V(p-p), 75 ohm PB: 0.7 V(p-p), 75 ohm AUDIO: 150 mV(rms), 22 k ohm or greater Suggested formats: 1080i, 480p, 480i, 720p _________ ** E-EDID = Enhanced-Extended Display Identification VIDEO/AUDIO OUTPUT (also for recording): VIDEO: 1 V(p-p), 75 ohm, negative sync. AUDIO: 150 mV(rms) (30% modulation equivalent, 2.2 k ohm or less) VARIABLE AUDIO OUTPUT: 0-300 mV(rms) (30% modulation equivalent, 2.2 k ohm or less) G-LINK™ and IR OUTPUT: 3 V(p-p), 3.5 mm mono socket (IR blaster cables supplied) IEEE1394 INPUT/OUTPUT: IEEE1394 compliant 4-pin DIGITAL AUDIO OUTPUT: Optical type Headphone jack: 3.5 mm stereo Dimensions 42HP95: Width: 43-3/8 inches (1100 mm) Height: 30-3/4 inches (778 mm) Depth: 15-3/8 inches (390 mm) 50HP95: Width: 49-5/8 inches (1258 mm) Height: 34-5/8 inches (877 mm) Depth: 15-3/8 inches (390 mm) Weight 42HP95: 117.3 lbs (53.0 kg) 50HP95: 142.6 lbs (64.7 kg) Supplied Accessories • Two dual-wand IR blaster cables • Remote control with two size "AA" alkaline batteries • Power cord (three wire grounding type) • Noise filter: ZCAT2436-1330A-M (see page 14) ZCAT3035-1330 (see page 14) • Clip (see item 19 on page 3) • Owner's Manual (this book) Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 107 #01E_107-111_4250HP95 107 Black (E) 42/50HP95 *web 213:276 05.9.12, 10:11 PM