Toshiba 72MX196 Operating Guide - Page 83
LED indications - review
UPC - 022265251492
View all Toshiba 72MX196 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
MX196_EN.book Page 83 Tuesday, June 27, 2006 1:43 PM Chapter 8: Troubleshooting LED indications The yellow, blue, and red/green LED lights on the TV (at the bottom center of the TV) indicate the TV's status, as described below. Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction. TV Front LAMP POWER TIMER REC Yellow LED Blue LED Red/Green LED "Voice announce" feature When certain non-standard conditions occur, the LEDs on the TV will blink and the TV will play a recorded "voice announcement" describing the condition (see the table below for the specific conditions that include a voice announcement). To repeat the voice announcement and hear additional information, press the MENU button on the TV while the LEDs are blinking. LED Indication 1) Blue is ON (solid). 2) Yellow blinks. 3) Blue is ON (solid). Yellow blinks. 4) Yellow is ON (solid). Red blinks. 5) Yellow is ON (solid). 6) Red blinks. 7) Blue is ON (solid). Green blinks. 8) Blue blinks slowly. 9) Blue blinks quickly. 10)Blue blinks quickly. Red blinks. 11)Blue blinks quickly. Yellow blinks. Red blinks. 12)Red is ON (solid). Condition The TV is operating properly. In LPS mode (standby with Quick Restart ON). The lamp is not working properly. The lamp is not working properly after the eighth automatic restart (see item #3). The lamp unit door is not seated properly. Fan stopped (light engine). Fan stopped (CableCard). Abnormal operation of BUS line. Power Protect Detection. The color wheel has stopped. An abnormal temperature increase has occurred. Recording in progress. Solution - Voice Announce - See "Setting the Quick Restart™ feature" (- page 30). - The TV will automatically try to restart itself eight times (see item #4). Note: If the TV is powered off and then quickly on again when the lamp unit is hot, it may take several minutes for the picture to appear on-screen. This is a property of DLP TV lamp technology and is NOT a sign of malfunction. For details, see "Setting the Quick Restart™ feature" and "IMPORTANT NOTICE ABOUT HOT LAMP RESTART" (- page 30). Turn the TV OFF and then ON again. If the problem persists, contact Consumer Solutions at 1-800-631-3811. - "Lamp not working" Turn OFF the TV and unplug the power cord. Review "Lamp unit replacement and care" in Chapter 9 to ensure that the lamp door is installed securely. "Lamp door is open." "Fan stopped." - Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn ON the TV. - - Turn OFF the TV. Check to make sure none of the slots or openings in the TV cabinet are covered, blocked, or dusty. Turn ON the TV again. - "Color wheel stopped." "Temperature warning." - If, after trying the solution, the problem still exists: • In the U.S., call TACP Consumer Solutions at 1-800-631-3811. • In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click "Home Entertainment," and then click "Support." 83 MX196 (E/F) Web 213:276