Toshiba MD13N3 Owners Manual - Page 11
Antenna Connections, Combination VHF/UHF Antenna Separate VHF and UHF 300 ohm Twin-lead Wires
View all Toshiba MD13N3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire) Antenna Jack Antenna Jack 75 ohm Coaxial Cable 300-75 ohm Matching Transformer Connect the 75 ohm Cable from the Combination VHF/UHF Antenna to the Antenna Jack. If your Combination VHF/UHF Antenna has a 300 ohm Twin-lead Wire, the use of the 300-75 ohm Matching Transformer may be necessary. Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires) Antenna Jack 300-75 ohm Matching Transformer Connect the UHF 300 ohm Twin-lead Wire to the Combiner (not supplied). Connect the VHF 300 ohm Twin-lead Wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack. Combiner UHF 300 ohm VHF 300 ohm Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires) Antenna Jack Connect the VHF 75 ohm cable and UHF 300 ohm Twin-lead Wire to the Combiner. Attach the Combiner to the Antenna Jack. Combiner VHF 75 ohm UHF 300 ohm 11