Uniden BC72XLT English Owners Manual - Page 40

BC72 Paper OM.fm Page 40 Monday, October 25, 2004 3:11 PM 6. Repeatedly press or until the option you want appears, then press E to select it. Otherwise, press if you do not want to select it. Then skip to Step 9. 7. Press E while C-C.PS appears. One of the following Pager Screen options appears. PS On: The scanner ignores hits on common pager frequencies. PS OFF: The scanner alerts you when it receives hits on common pager frequencies. 8. Repeatedly press or until the option you want appears, then press E to select it. 9. When you select the option, press Scan to start Close Call search. Otherwise, to continue normal scanning, repeatedly press Func until F disappears then press Scan. Using Close Call RF Capture To turn on the Close Call feature, press Func + once except in WX search, band select, or program mode. appears. Every 2 seconds, the scanner checks for frequencies in the range you specified in "Setting the Close Call Options" on Page 38. Notes: • Set the squelch tight (where only strong signals are received) while using Close Call. • To continue scanning normally while the Close Call feature is working, simply press Scan twice. When the scanner finds a frequency, it sounds the alert you specified in "Setting the Close Call Options" on Page 38, and Found flashes. Press any key to confirm the displayed frequency. Press Scan to resume scanning. Or press or while the frequency and F appear to select the band where you are searching. Special Features 40