Uniden BCD325P2 Owners Manual - Page 107

Weather Operation Menu

Get Uniden BCD325P2 PDF manuals and user guides View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

3. Scroll to 'Set Lockout' and press E/yes. 4. Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save and exit. 5. Scroll to 'Set Hold Time' and press E/yes. 6. Enter the hold time (0-255 seconds) you desire and press E/yes to save and exit. Note: If you want to store any of the hits, set a hold time long enough to get to the E/yes button when the frequency appears in the display. WEATHER OPERATION MENU Your scanner allows you to search for a local NOAA weather broadcast and set it to alert when a SAME weather alert is broadcast on a NOAA weather channel. You can also program FIPS codes into the scanner and use weather alert priority that will check the weather channel every 5 seconds for a weather alert signal. To Edit Weather Options, press Menu. 1. Scroll to 'WX Operation' and press E/yes. 2. Scroll to the settings and options below and press E/yes. 3. Press Scan/Srch to return to scanning when done with editing. Weather Scan Program SAME Set Attenuator Weather Alert Weather Alert Priority Set Delay Time Set Audio AGC Weather Scan The scanner starts scanning the preprogrammed weather frequencies and stops on the first good signal. If the signal is lost, the scanner resumes searching for another weather transmission. Note: You can also turn on weather scan by pressing and holding the WX button in scan or search modes. 1. Scroll to 'Weather Scan' press E/yes. 2. Press Scan to exit. In Weather Scan Mode: 1. To search for another weather channel turn the scroll control. 2. To start Weather Alert press Func then 0(wx). 3. Scroll to 'Alert Only', 'SAME 1-5', or 'All FIP' and press E/yes. 4. To return to Weather Scan from Weather Alert press Func then 0(wx). 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
107
3.
Scroll to ‘Set Lockout’ and press
E/yes
.
4.
Scroll to ‘Unlocked’, ‘Temporary L/O’, or ‘Lockout’ and press
E/yes
to save
and exit.
5.
Scroll to ‘Set Hold Time’ and press
E/yes
.
6.
Enter the hold time (
0-255
seconds) you desire and press
E/yes
to save and
exit.
Note: If you want to store any of the hits, set a hold time long enough to get to
the
E/yes
button when the frequency appears in the display.
WEATHER OPERATION MENU
Your scanner allows you to search for a local NOAA weather broadcast and set it
to alert when a SAME weather alert is broadcast on a NOAA weather channel. You
can also program FIPS codes into the scanner and use weather alert priority that will
check the weather channel every 5 seconds for a weather alert signal.
To Edit Weather Options, press
Menu
.
1.
Scroll to ‘WX Operation’ and press
E/yes
.
2.
Scroll to the settings and options below and press
E/yes
.
3.
Press
Scan/Srch
to return to scanning when done with editing.
Weather Scan
Program SAME
Set Attenuator
Weather Alert
Weather Alert
Priority
Set Delay Time
Set Audio AGC
Weather Scan
The scanner starts scanning the preprogrammed weather
frequencies and stops on the first good signal. If the signal is lost, the scanner
resumes searching for another weather transmission.
Note: You can also turn on weather scan by pressing and holding the
WX
button in scan or search modes.
1.
Scroll to ‘Weather Scan’ press
E/yes
.
2.
Press
Scan
to exit.
In Weather Scan Mode:
1.
To search for another weather channel turn the scroll control.
2.
To start Weather Alert press
Func
then
0(wx)
.
3.
Scroll to ‘Alert Only’, ‘SAME 1-5’, or ‘All FIP’ and press
E/yes
.
4.
To return to Weather Scan from Weather Alert press
Func
then
0(wx)
.