Uniden BCD325P2 Owners Manual - Page 84
Current Threshold Se°ng, Threshold Voltage Level
View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Van Cort Patrol C 935. 0125MHz NFW P25 ERR:14 8 AUTO T 1.38 1.60 1.82 Current Threshold Setting Threshold Voltage Level The first line on the display will show the digital error rate and the decode threshold setting (0-20) when receiving. The second line on the display shows the decode threshold levels. Allow the scanner to monitor the site or frequency for several minutes. Press Func and rotate the Scroll Control to change the decode threshold level setting and obtain the lowest error rate possible when receiving transmissions. Whatever you set at this point will be remembered as the starting point for the auto-tuning function for subsequent transmission. To exit P25 Adjustment Mode press Vol. See also the following settings to make adjustments P25 Waiting Time, P25 LP Filter, and P25 Threshold. LOCKING/UNLOCKING SYSTEMS/SITES/SEARCHES With the advent of multi-site trunking, you can no longer lockout a trunking system. You have to lockout the site(s) assigned to the system. You can still lockout conventional systems and searches the same way. Also, with the ability now to assign quick keys the searches you can turn them off and on or lockout/unlock them just like conventional systems and trunked sites. Remember, unlocking or locking out a system/site/search is not the same thing as enabling/disabling it (turning the quick key on or off). To Lock out a Conventional System/Trunked Site/Search in Scan Mode hold on any channel/frequency in the system/site/search, press Func then L/O to toggle 'Unlocked', 'Temporary L/O', or 'Lockout'. Press Hold to resume. Note: 'Temporary Lockout' means unlocked the next time you cycle power the site/system/search will be unlocked. Or, use Menu to drill down to the system/site/search options and lock it out there. See 'Edit Conventional System Options', 'Edit Site Options', 'Edit Service Search', or 'Edit Custom Search'. To Unlock a Conventional System/Trunked Site/Search in Scan Mode press and hold Func to 'lock' function mode. 84