Uniden BCD325P2 Owners Manual - Page 76
Priority/priority Id/priority Plus Scan
View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
PRIORITY/PRIORITY ID/PRIORITY PLUS SCAN Priority Scan When scanning a conventional system, scanning is interrupted (based on the priority check interval setting) to check priority channels for activity. The more channels you have set to priority, the longer the interruption is. The scanner cannot scan over 100 priority channels at once. The quick keys for the system(s) and group(s) containing the priority channel(s) have to be enabled (and unlocked) or the scanner will display 'Priority Scan No Channel'. Priority Plus Scan the scanner only scans priority channels in (unlocked) conventional systems with system and group quick keys enabled. The highest priority is for channels in system/site and group quick key 1. The lowest priority is for channels in system/site quick key 90 and group quick key 0. Priority for priority channels in the same channel group follows the order in which the channels were created. Priority ID Scan this function is similar to conventional priority although there is no interruption during the transmission. Priority ID Scan is always on for a system if enabled in the system setting. Priority is checked in between transmissions, when the scanner is receiving the control channel, and during the channel delay period. The scanner can only look for priority IDs in the trunked system it is currently scanning. Preemptive Priority preemptive priority is a feature that works on Motorola systems. If the Motorola system has priority channels, and you assign one of those TGs as priority in the scanner, then when one of those channels becomes active, the scanner will jump to it even if it is on a different system voice channel (i.e. it preempts your current reception). This feature relies on the system itself having talkgroups assigned as priority (so the active channel information is included on voice channel low-speed data). If a talkgroup you assign as priority is not also a priority channel on the transmitting system, then the scanner will use standard trunking priority for the talkgroup. To Use Priority Scan you must first set your priority channels. To Use Priority ID Scan you must also enable Priority ID Scan for each system. To Edit Priority Scan Options: 1. Press Menu. 2. Scroll to 'Priority Scan' and press E/yes. 3. Scroll to the options below and press E/yes. 4. Press Scan/Srch to return to scanning when done with editing. Set Priority sets the priority mode. You can also toggle these modes by pressing Func then .no(pri) in scan mode. 1. Scroll to 1 of 3 options and press E/yes. 76