Uniden BCD325P2 Owners Manual - Page 38
Set GPS Format, Set GPS Baud Rate, Band Defaults
View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Set GPS Format Allows you to set the GPS format to DD,MM,SS or decimal degrees (DD.000000), time format, time zone, and units. 1. Scroll to 'Set GPS Format' and press E/yes. 2. Scroll to 'Pos Format' and press E/yes. 3. Scroll to 'DMS:DDD MM"SS.ss' or 'DEG:DDD.dddddd' and press E/yes to save and exit. 4. Scroll to 'Set Time Format' and press E/yes. 5. Scroll to '12H' or '24H' and press E/yes to save and exit. 6. Scroll to 'Set Time Zone' and press E/yes. 7. Scroll to 'Your Time Zone' and press E/yes to save and exit. 8. Scroll to 'Set Unit' and press E/yes. 9. Scroll to 'mile' or 'km' and press E/yes to save and exit. 10. Press Menu to return. Set GPS Baud Rate Allows you to set the baud rate for the serial port. You set the port to match the speed used to communicate to 4800 bps for communicating with BC-GPSK and BC-UTGC. 1. Scroll to 'Set GPS Baud Rate' and press E/yes. 2. Scroll to Off, 4800, 9600, 19200, 38400, 57600, or 115200 and press E/yes to save and exit. Band Defaults Basically, this setting allows you change the 'Auto' values you can select while programming frequencies, searches, etc. to whatever you feel 'Auto' should be for each band (vs. the radio defaults). Since all of the step and modulation settings default to 'Auto', this allows you to skip those settings when programming. Note: these setting have no effect on service searches. 1. Scroll to the band you wish to edit and press E/yes. 2. At 'Set Modulation' scroll to AM, NFM, FM, WFM, or FMB (Broadcast) and press E/yes to save and exit. 3. At 'Set Step' scroll to Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz and press E/yes to save and exit. 4. Scroll to any other bands you wish to edit and repeat. 38