Uniden TRAX436 Owners Manual - Page 61
Creating a multi-point route inserting a via, point
View all Uniden TRAX436 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
How Do I Use It? This feature is available in Advanced mode only. The procedure is explained starting from the Navigation menu. 1. Tap the following buttons: , . 2. [optional] Tap displayed coordinates. to change the format of the 3. Tap the latitude or longitude value to change the coordinate. 4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the longitude (E or W). 5. Tap . 6. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Creating a multi-point route (inserting a via point) Multi-point routes are created from simple routes, so a route must be active first. One of the ways of expanding the route is to keep the destination, and to add via points (intermediate destinations). This feature is available in Advanced mode only. 1. Select a new location as you did in the previous sections. This will be the additional destination in the route. 2. The map appears with the selected point in the middle, and the Cursor menu opens automatically. 3. Tap to add the point as an intermediate destination preceding the final destination of the route. 4. [optional] To add more points to the route, repeat the above steps as many times as you like. Page 61