ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone - Page 22
Connect to the computer or monitor, Connect to the computer
View all ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connect to the computer or monitor Connect to the computer 1. Use the VGA cable provided. Plug one end to the D-Sub output jack at the computer end. 2. Connect the other end of the VGA cable to the COMPUTER signal input jack on the projector. Many notebooks have not activated their monitor jack after being connected to the monitor. The user can often press FN + F3 or CRT/LCD button to switch ON/OFF the externally connected monitor. Find the function key labeled with the CRT/LCD or monitor icon on the notebook. Press the FN key and the labeled function key. Please refer to the instruction manual provided with the notebook computer for the combination keys and their functions. Connect to the monitor If you want the display to be shown both on the computer monitor as well as the screen, refer to the following instructions. Connect the VGA cable to the COMPUTER OUT signal output jack on the projector as well as the external display. 1. Connect the projector to the computer as described in the "Connect to the computer" section. Use a suitable VGA cable (only 1 such cable is provided) and connect one end of the cable to the D-Sub input jack on the video display. 2. If the display is provided with a DVI input jack, then connect the DVI end of the VGADVI-A cable to the DVI input jack on the video display. 3. Connect the other end of the cable to the COMPUTER OUT jack on the projector. The MONITOR OUT output is only available when the COMPUTER 1 is connected to the projector in the standby mode. To use this connection mode, open the Power Management > Active VGA Out function in the Standby Settings menu. 15