ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone - Page 40
Setting the Presentation Timer, To cancel the timer, perform the following steps
View all ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setting the Presentation Timer The presentation timer can indicate the presentation time on-screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Enter Basic > Presentation Timer menu. 2. Press [Enter] to show the Presentation Timer page. 3. Select Timer Period and press / to confirm the duration. Duration can be set to 1 to 5 minutes, with 1 minute increments, or 5 to 240 minutes. The options are 5, 10, 15, 20, 60, 120, 240 minutes. Once the timer has been activated, resetting the timer interval will re-activate the timer. 4. Press and select the Timer Display. Then press / to select whether to display or hide the on-screen timer. Selection Always 1 min/2 min/3 min Never Description Displays the timer on screen throughout the presentation time. Display timer on-screen in the last 1 / 2 / 3 minutes. Hides the timer throughout the presentation time. 5. Press and select Timer Position, and then press / to set timer location. Top-Left Bottom-Left Top-Right Bottom-Right 6. Press to select Timer Counting Direction, then press / to select the required timer method. Selection Count Up Count Down Description Increases from 0 to the preset time. Decrease from the preset time to 0. 7. To activate Presentation Timer, press and select Start Counting, then press / to select Yes. The timer will start counting after exit the OSD menu. To cancel the timer, perform the following steps: 1. Enter Basic > Presentation Timer menu. 2. Press and select Start Counting. 3. Select No. The timer will stop counting after exit the OSD menu. 33