ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone - Page 45
Control the projector with the web browser, If you are in a non-DHCP environment
View all ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
If the RJ45 cable is not correctly connected, the IP address, subnet mask, default gateway and DNS server settings will be displayed as 0.0.0.0. Make sure the cable has been correctly connected and re-execute the above steps. To connect to the projector when the projector is in the standby mode, set the Advanced > Network Settings > Standby LAN control to On. If you are in a non-DHCP environment: 1. Repeat the above steps 1-2. 2. Select DHCP and then press / to select Off. 3. Contact your ITS administrator for the setting information about IP address, subnet mask, default gateway and DNS server. 4. Press to select the item you want to modify and then press [Enter]. 5. Press / to move the cursor and then press / to input the value. 6. To save the settings, press [Enter]. If you do not want to save the settings, press [Exit]. 7. Press to select the Apply and then press [Enter]. If the RJ45 cable is not correctly connected, the IP address, subnet mask, default gateway and DNS server settings will be displayed as 0.0.0.0. Make sure the cable has been correctly connected and re-execute the above steps. To connect to the projector when the projector is in the standby mode, make sure the DHCP has set to Off and the IP address, subnet mask, default gateway and DNS server information have been acquired after the projector is powered on. Control the projector with the web browser If the correct IP address of the projector is acquired, and the projector is powered on or in the standby mode, any computer in the same local area network can be used to control the projector. If Microsoft Internet Explorer is used, make sure the version is 7.0 or higher. The screenshots in this manual are for reference only. Actual OSD design may differ. 1. Enter the address of the projector in the address bar of your browser and press [Enter]. 2. The homepage of "Network Control" is displayed. 3 4 5 Access to the Network Settings or Email Alert web page needs the administrator password. The default password is "0000". 38