ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone - Page 23

Connecting to Video source devices, Best video quality, Connecting audio

Get ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone PDF manuals and user guides View all ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Connecting to Video source devices You can connect the projector to any of the following video source device with an output jack: • HDMI (PA501S does not have this interface) • Component Video • S-Video • Video (composite video) Only 1 of the aforementioned connection methods is required to connect the projector to the video source device. However, different connection methods would provide a different video quality. The connection method selected would be determined by the presence of matching jacks on the projector and Video source device: Best video quality HDMI is the best video connection method available. If the source device comes with HDMI jacks, you will be able to acquire uncompressed digital video quality. Please refer to "Connecting to HDMI devices" for details on how to connect the projector to HDMI devices. If you don't have any usable HDMI source, the next best video signal would be Component Video (not to be confused with Composite Video). Digital TV tuners and DVD players are provided with Component Video output sockets. If your device includes Component Video, then this would be your primary choice of connection to the (composite) video. Please refer to "To connect the projector to a Component Video source device:" for details on how to connect your projector to Component Video devices. Better video quality S-video method provides slightly better simulation video compared to standard composite videos.If the video device is provided with both composite video and s-video output jacks, you should try to choose S-video connection first. Please refer to "Connect to S-video signal source device" for details on how to connect your projector to S-video devices. Least video quality Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here. Please refer to "Connecting to composite video source devices" for details on how to connect your projector to composite video devices. Connecting audio You can use the speaker of the projector in the presentation or connect other individual speaker to the audio output jack of the projector. Audio output is controlled by the volume and mute setup of the projector. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
16
Connecting to Video source devices
You can connect the projector to any of the following video source device with an output
jack:
•
HDMI (PA501S does not have this interface)
•
Component Video
•
S-Video
•
Video (composite video)
Only 1 of the aforementioned connection methods is required to connect the projector to
the video source device. However, different connection methods would provide a different
video quality. The connection method selected would be determined by the presence of
matching jacks on the projector and Video source device:
Best video quality
HDMI is the best video connection method available. If the source device comes with
HDMI jacks, you will be able to acquire uncompressed digital video quality.
Please refer to
“Connecting to HDMI devices”
for details on how to connect the projector to
HDMI devices.
If you don’t have any usable HDMI source, the next best video signal would be Component
Video (not to be confused with Composite Video). Digital TV tuners and DVD players are
provided with Component Video output sockets. If your device includes Component Video,
then this would be your primary choice of connection to the (composite) video.
Please refer to
“To connect the projector to a Component Video source device:”
for details
on how to connect your projector to Component Video devices.
Better video quality
S-video method provides slightly better simulation video compared to standard composite
videos.If the video device is provided with both composite video and s-video output jacks,
you should try to choose S-video connection first.
Please refer to
“Connect to S-video signal source device”
for details on how to connect
your projector to S-video devices.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but less than
optimal result from your projector, being the least video quality of the available methods
described here.
Please refer to
“Connecting to composite video source devices”
for details on how to
connect your projector to composite video devices.
Connecting audio
You can use the speaker of the projector in the presentation or connect other individual
speaker to the audio output jack of the projector. Audio output is controlled by the volume
and mute setup of the projector.