ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone - Page 55

Description of each menu, Function, Description, Display menu, Image menu

Get ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone PDF manuals and user guides View all ViewSonic LS625W - 3200 Lumens WXGA Short Throw Laser Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Description of each menu Function Aspect Ratio Keystone Corner Adj. Position Description See "Selecting the aspect ratio" for details. See "Perform keystone correction" for details. See "Adjust four corners" for deatils. Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC and component input signal is selected. The adjustment range may vary under different timings. Adjusts the clock phase to reduce image distortion. 1. Display menu Phase H. Size Zoom OverScan 3X Fast Input Color mode Brightness Contrast Color Temp. This function is only available when a PC and component input signal is selected. Adjusts the horizontal width of the image. This function is only available when a PC and component input signal is selected. Zoom in or out picture. To avoid the appearance of the distorted image at the edge of the screen, use over-scanning technology to expand the image by 5% or even 10%, and the distorted image extends to the place outside the screen; only the middle part with better linearity is shown. Selecting On enables the function. This feature helps reduce the frame rate. Enabling quick response in local timing. The following settings will return to factory defaults when enabled: aspect ratio, keystone correction, position, zoom, over scan. This function is only available if the optimum resolution input signal is selected. See "Selecting a picture mode" for details. See "Adjusting Brightness" for details. See "Adjusting Contrast" for details. For more details, please refer to "Selecting a Color Temperature" and "Setting a preferred color temperature". 2. Image menu 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
48
Description of each menu
Function
Description
1. Display menu
Aspect Ratio
See
“Selecting the aspect ratio”
for details.
Keystone
See
“Perform keystone correction”
for details.
Corner Adj.
See
“Adjust four corners”
for deatils.
Position
Displays the position adjustment page. To move the
projected image, use the directional arrow keys. The
values shown on the lower position of the page change
with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC and
component input signal is selected.
The adjustment range may vary under different timings.
Phase
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC and
component input signal is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC and
component input signal is selected.
Zoom
Zoom in or out picture.
OverScan
To avoid the appearance of the distorted image at the
edge of the screen, use over-scanning technology
to expand the image by 5% or even 10%, and the
distorted image extends to the place outside the
screen; only the middle part with better linearity is
shown.
3X Fast Input
Selecting
On
enables the function. This feature helps
reduce the frame rate. Enabling quick response
in local timing. The following settings will return to
factory defaults when enabled: aspect ratio, keystone
correction, position, zoom, over scan. This function is
only available if the optimum resolution input signal is
selected.
2. Image menu
Color mode
See
“Selecting a picture mode”
for details.
Brightness
See
“Adjusting Brightness”
for details.
Contrast
See
“Adjusting Contrast”
for details.
Color Temp.
For more details, please refer to
“Selecting a
Color Temperature”
and
“Setting a preferred color
temperature”
.