Vizio M221NV M221NV User Manual - Page 12

Wall Mounting your HDTV - vesa

Get Vizio M221NV PDF manuals and user guides
UPC - 845226004681
View all Vizio M221NV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

VIZIO M221NV User Manual Wall Mounting your HDTV Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below. 1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to have it handy if you need to call for support. 2. Remove the stand base and neck: a. Disconnect the cables from your HDTV. b. Place your HDTV face down on a soft, flat surface to prevent damage to the screen. c. Remove the neck stand cover by sliding it up. d. Remove the three (3) screws holding the stand neck, and then remove the neck and base. Note: To remove the base from the neck, unscrew thumbscrew on bottom. 3. Mount your HDTV on the wall: a. Using the same three screws you just removed, attach the bracket to the back of the TV, in the holes the stand neck was in. b. Attach the wall mount to the plate on the other side of the bracket. Wall Mounting Specifications Screw Size M4 Screw Length 20.0 mm Screw Pitch 1.0 mm Hole Pattern VESA standard 100 x 100 mm spacing Version 5/13/2010 11 www.VIZIO.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
VIZIO M221NV User Manual
Version 5/13/2010
11
www.VIZIO.com
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow
the instructions below.
1.
Write down the serial number located on the back of your
HDTV in the space provided on page 1 to have it handy if you
need to call for support.
2.
Remove the stand base and neck:
a.
Disconnect the cables from your HDTV.
b.
Place your HDTV face down on a soft, flat surface to
prevent damage to the screen.
c.
Remove the neck stand cover by sliding it up.
d.
Remove the three (3) screws holding the stand neck,
and then remove the neck and base.
Note:
To remove the base from the neck, unscrew thumbscrew on
bottom.
3.
Mount your HDTV on the wall:
a.
Using the same three screws you just removed, attach
the bracket to the back of the TV, in the holes the
stand neck was in.
b.
Attach the wall mount to the plate on the other side of
the bracket.
Wall Mounting Specifications
Screw Size
M4
Screw Length
20.0 mm
Screw Pitch
1.0 mm
Hole Pattern
VESA standard 100 x 100
mm spacing