Vtech VH6211 Abridged User Manual - Page 12

Getting started Power up the headset base 1. Plug the small end of the headset base power adapter labelled to the POWER jack (green dot) at the rear of the headset base. 2. Plug the large end into an electrical outlet not controlled by a wall switch. Charge the headset battery Hang the headset onto the magnetic charging mount. The magnet holds the headset in place. • The light will turn: - steady red when the headset battery is low while charging; - steady purple when the battery is well charged; and - steady blue when the battery is fully charged. Note • For optimal performance, charge the headset battery for at least 30 minutes before use. The battery is fully charged after 2 hours of continuous charging. When the headset is not in use, recharge by hanging it onto the headset base. 5