Vtech VH6211 Abridged User Manual - Page 25
Operate
View all Vtech VH6211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Operate PHONE mode Before using the headset with your telephone connected, make sure you have chosen PHONE mode. To choose PHONE mode: • Press the PHONE button on the headset base. The PHONE light turns on. Operate with IP phone via EHS To make a call: 1. Press the ON/OFF button on the headset. The EHS connection automatically takes the phone line at your IP phone. • When you hear a clear dial tone at the headset earpiece, you are now ready to dial a call. • If the dial tone is unclear or you do not hear a dial tone, slide the Audio Adjustment Switch at the bottom of the headset base between A and F, until the dial tone is clear. The default setting of the Audio Adjustment Switch is A. 2. Dial the telephone number using the dialing keys on the IP phone. Notes • The audio adjustment setting is dependent on - the types of deskphones to which the headset base is connected; and - the interference caused by other DECT systems operating in the same environment. • The headset supports hot swapping, in which the current call on the headset will remain connected if you replace the battery within five minutes. To answer a call: • Press the ON/OFF button on the headset to answer an incoming call, or lift the headset if auto answer is set to on. The EHS connection automatically takes the line on your IP phone. You hear the caller through the headset earpiece. To end a call: • Press the ON/OFF button on the headset to end a call. The EHS connection automatically releases the line on your IP phone. 18