Vtech VH6211 Abridged User Manual - Page 36

Lifter Connect the Lifter For conceptual reference of the connection to a traditional corded phone with Lifter, see page 9. Operate with Lifter To make a call: 1. Press the ON/OFF button on the headset. The lifter's switch hook presser rises and releases the switch hook. • When you hear a clear dial tone at the headset earpiece, you are now ready to dial a call. • If the dial tone is unclear or you do not hear a dial tone, slide the Audio Adjustment Switch at the bottom of the headset base between A and F, until the dial tone is clear. The default setting of the Audio Adjustment Switch is A. 2. Dial the telephone number using dialing keys on the corded phone. Notes • The audio adjustment setting is dependent on - the types of deskphones to which the headset base is connected; and - the interference caused by other DECT systems operating in the same environment. • The headset supports hot swapping, in which the current call on the headset will remain connected if you replace the battery within five minutes. To answer a call: • Press the ON/OFF button on the headset to answer an incoming call, or lift the headset if auto answer is set to on. The lifter's switch hook presser rises and releases the switch hook. You hear the caller through the headset earpiece. To end a call: • Press the ON/OFF button on the headset to end a call. The lifter's switch hook presser pushes down the switch hook and ends the call. 29