Vtech vt2910 User Manual - Page 18

BASE UNIT FEATURES BASE LED INDICATORS POWER LED Glows when the AC adaptor is supplying power to the Base Unit. CHARGE LED Glows when the Handset is placed in the Base Unit cradle to charge. SPARE CHARGE LED Glows when the (optional) battery pack is installed in spare battery compartment in the Base Unit. INTERCOM LED Glows when the Base Unit has entered the INTERCOM mode with the Handset. MUTE LED Glows when the MUTE key has been pressed, indicating that the Base Unit microphone has been temporarily disabled. LINE 1 (EXTENSION IN USE) LED Glows steadily when the Base Unit is accessing LINE 1. Flashes slowly when only the Handset or an extension phone is accessing LINE 1. Flashes rapidly when LINE 1 is placed on HOLD. Flashes in cadence with the incoming ring when you receive a call. LINE 2. Flashes rapidly when LINE 2 is placed on HOLD. Flashes in cadence with the incoming ring when you receive a call. LINE 1 KEY Press this key to access or FLASH LINE 1. During CONFERENCE mode, pressing this key will maintain access to LINE 1 while placing LINE 2 on HOLD. LINE 2 KEY Press this key to access or FLASH LINE 2. During CONFERENCE mode, pressing this key will maintain access to LINE 2 while placing LINE 1 on HOLD. OFF KEY Press this key to disconnect the Base Unit during any of the following conditions: 1. The Base Unit is on LINE 1 or 2 2. The Base Unit is CONFERENCING LINES 1 and 2 3. The Base is in INTERCOM mode. NOTE: Pressing this key affects the Base Unit only. Also, pressing OFF will not disconnect a call which the Base Unit has placed on HOLD. LINE 2 (EXTENSION IN USE) LED Glows steadily when the Base Unit is accessing LINE 2. Flashes slowly when only the Handset or an extension phone is accessing 18 VT2910C EN MANU 18 12/16/99, 6:17 AM