Vtech vt2910 User Manual - Page 6

Rechargeable Battery Packs - vt2910c phone

Page 6 highlights

RECHARGEABLE BATTERY PACKS Charging the Handset batteries The Handset of your VTech 2910c cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever the Handset is in the Base Unit cradle. You should charge the battery pack for 16 hours when you first receive your phone. You will know the battery pack needs charging when: Spare Battery Charger Alternatively, if you have purchased a spare battery pack and it has been charging in the base unit, simply exchange the drained Handset battery pack with the fully charged replacement battery pack from the spare battery charger. Place the drained Handset battery pack into the spare battery charger so it will charge. • The phone emits a warning tone when you press the PHONE key. • The "LOW BATTERY" message is displayed on the LCD: The base spare battery charger does NOT charge a battery pack as quickly as the main Handset charger. A full charge requires 24 hours. • The Handset seems completely dead, the LCD is clear and the Handset does not beep when you press the keys. To Charge The Battery Pack To charge the battery pack, place the Handset in the Base Unit. The CHARGE indicator will light to show the Handset is seated properly and the battery pack is charging. It is recommended that the battery pack be charged for at least 16 hours initially and 8 hours for maintenance charging. You can use your telephone before that with diminished capacity, but it is best to charge the battery pack fully. It will take several recharge cycles to maximize the charge capacity of your battery pack. The maximum batter life between charges is 7 hours of continuous talk time or 7 days of standby time. A Word About Rechargeable Batteries Your NiCad battery pack recharges whenever the Handset is returned to the Base Unit. To maximize the life of your battery pack, do not return your VT 2910c Handset to the Base Unit cradle for recharging LOW BATTERY is displayed on the LCD. IT'S IMPOSSIBLE TO OVERCHARGE The battery pack can be recharged many times but if you get a low battery signal even after 8 hours of maintenance charging in the base cradle (or 24 hours in the spare battery charger), the battery pack(s) should be replaced. To purchase additional Battery Packs, call VTECH Communications at 1800-595-9511. In Canada, call VTECH Electronics at 1-800-2677377. VT2910C EN MANU 6 6 12/16/99, 6:15 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

6
RECHARGEABLE BATTERY PACKS
Charging the Handset batteries
The Handset of your
VTech 2910c
cord-
less telephone is powered by a re-
chargeable battery pack.
It charges
automatically whenever the Handset is
in the Base Unit cradle.
You should
charge the battery pack for 16 hours
when you first receive your phone.
You
will know the battery pack needs
charging when:
The phone emits a warning tone
when you press the PHONE key.
The “LOW BATTERY” message is
displayed on the LCD:
The Handset seems completely
dead, the LCD is clear and the
Handset does not beep when you
press the keys.
To Charge The Battery Pack
To charge the battery pack, place the
Handset in the Base Unit.
The
CHARGE
indicator will light to show the
Handset is seated properly and the bat-
tery pack is charging.
It is recom-
mended that the battery pack be
charged for at least 16 hours initially and
8 hours for maintenance charging.
You
can use your telephone before that with
diminished capacity, but it is best to
charge the battery pack fully.
It will take
several recharge cycles to maximize the
charge capacity of your battery pack.
The maximum batter life between
charges is 7 hours of continuous talk
time or 7 days of standby time.
Spare Battery Charger
Alternatively, if you have purchased a
spare battery pack and it has been
charging in the base unit, simply
exchange the drained Handset battery
pack with the fully charged replacement
battery pack from the spare battery
charger.
Place the drained Handset
battery pack into the spare battery
charger so it will charge.
The base spare battery charger does
NOT charge a battery pack as quickly
as the main Handset charger.
A full
charge requires 24 hours.
A Word About Rechargeable
Batteries
Your NiCad battery pack recharges
whenever the Handset is returned to the
Base Unit.
To maximize the life of your battery pack,
do not return your
VT 2910c
Handset
to the Base Unit cradle for recharging
LOW BATTERY
is displayed on the
LCD.
IT’S IMPOSSIBLE TO OVERCHARGE
The battery pack can be recharged
many times but if you get a low battery
signal even after 8 hours of
maintenance charging in the base
cradle (or 24 hours in the spare battery
charger), the battery pack(s) should be
replaced.
To purchase additional Battery Packs,
call VTECH Communications at 1-
800-595-9511.
In Canada, call
VTECH Electronics at 1-800-267-
7377.
VT2910C EN MANU
12/16/99, 6:15 AM
6