Weider Cobra 1000 English Manual - Page 11

ATTACHING THE LAT BAR OR NYLON STRAP TO THE HIGH PULLEY STATION Attach the Lat Bar (24) to the Medium Cable (68) with a Cable Clip (72). The Nylon Strap (70) can be attached in the same manner. 68 72 24 70 O LOCKING THE PRESS ARM LEVER Disconnect the cable and s-hook from the leg lever. Remove the Press Arm (SEE ADJUSTING THE PRESS ARM on page 10). 8 L Lift the Press Arm Lever (8) until it is above the indi- cated holes in the Weight Guides (38). Insert the Long "L"-Pin (58) through the holes in the Weight Guides. Rest the Press Arm Lever on the Long "L"- in. 58 O 38 USING THE LOW PULLEY STATION \ Tr• perform low pu!!ey excrolcoo., tho pross zirm !cvcr sm_augst be locked in place (see LOCKING THE PRESS ARM LEVER above). Remove the backrest (see ATTACHING AND REMOVING THE BACKREST on e 10). Attach the Lat Bar (24) to the Short Cable (71) with a Cable Clip (72). Attach the other end of the Short Cable to the end of the Long Cable (18) with the s-hook. The Nylon Strap (70) can be attached in the same manner. LOCKING THE LEG LEVER To lock the Leg Lever (37), hold the Leg Lever against the Front Leg (31). Insert the Long Lock Pin (11) into the Leg Lever. The clip on the Long Lock Pin should be turned so that it locks onto the Front Leg. Note: The leg lever should be locked whenever it is not being used. 71 72 18 .L4. 70 24 11 31 . 0 37 11