Weider Pro 450 English Manual - Page 5
Part Identification Chart - parts
 |
View all Weider Pro 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. 16mm x 18.5mm Spacer (8) M6 x 16mm Screw (3) M6 x 38mm Screw (4) M6 x 62mm Screw (7) Leg Lever Spacer (9) M10 Washer (6) M8 x 64mm Bolt (43) M8 Nylon Locknut (13) M8 Washer (23) M10 Nylon Locknut (11) M6 Washer (30) M10 x 62mm Carriage Bolt (33) M10 x 68mm Bolt (34) M10 x 75mm Bolt (48) M10 x 155mm Bolt (22) 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
5
M10 Nylon Locknut (11)
M8 Nylon Locknut (13)
M6 Washer (30)
M8 Washer (23)
M6 x 16mm Screw (3)
Leg Lever Spacer (9)
16mm x 18.5mm Spacer (8)
M8 x 64mm Bolt (43)
M10 x 62mm Carriage Bolt (33)
M6 x 38mm Screw (4)
M6 x 62mm Screw (7)
M10 Washer (6)
M10 x 68mm Bolt (34)
M10 x 155mm Bolt (22)
M10 x 75mm Bolt (48)
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual.
Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
PART IDENTIFICATION CHART