Weider Pro 450 English Manual - Page 7

2. Identify the Left Upright (37) by the position of the adjustment brackets. Press a 51mm x 76mm Inner 2 Cap (24) into the top of the Left Upright. Press a 2" Square Inner Cap (17) into each end of the Left Stabilizer (25). Press a 38mm Square Inner Cap (31) into the vertical tube on the Left Stabilizer. Insert four M10 x 62mm Carriage Bolts (33) up through the Left Stabilizer (25). Place the Left Stabilizer flat on the floor. Slide the Left Upright (37) onto the four M10 x 62mm Carriage Bolts (33) in the Left Stabilizer (25). Attach the Upright with four M10 Nylon Locknuts (11). Adjustment Brackets 11 24 37 31 11 11 17 17 3. Insert two M10 x 68mm Bolts (34) into an Upright Support Plate (16). Next, insert the Bolts into the indi- 3 cated holes in the Right Upright (1). While a second person holds the Right Upright (1), slide the bracket on the Crossbar (20) over the two 1 M10 x 68mm Bolts (34). Make sure that the Crossbar is turned so the decal is on top. Secure the Crossbar with two M10 Nylon Locknuts (11). Attach the Crossbar (20) to the Left Upright (37) in the same manner. 25 33 33 37 34 11 16 20 11 Decal 11 11 16 34 7