Weider Pro 9300 English Manual - Page 10
Arm Assembly
View all Weider Pro 9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
14. Attach a Press Arm (7) to one side of the 14 Press Frame (12) with two 5/16" x 2 1/2" Bolts (39) and two 5/16" Nylon Locknuts (40). Attach the other Press Arm (7) to the Press Frame (12) in the same manner. 39 7 ARM ASSEMBLY 15. Press a 1" Round Inner Cap (70) into one of 15 the Press Arms (7). Press a 1 3/4" Square Inner Cap (48) into the Press Arm. Repeat this step for the other Press Arm (not shown). 40 7 12 48 70 7 16. Lubricate both axles on the Butterfly Frame (3). Refer to the drawing and identify the Right Fly Arm (5) and the Left Fly Arm (6). Press a 1 3/4" Square Inner Cap (48) into the upper end of the Left Arm (6). Slide the Left Fly Arm onto the indicated axle. Note: Be careful not to confuse the Left Arm with the Right Arm (5). Be sure that the upper end of the Left Arm is behind the indicated bracket on the Butterfly Frame (3). IMPORTANT NOTE: Before assembling the 1" Retainers (45) used in this step, be sure that you thoroughly understand the step. The Retainers can be assembled only once. If they must be removed, you will need to order new Retainers. Tap two 1" Retainers (45) and a 1" Round Outer Cap (46) onto the axle. Be sure that the teeth on the Retainers bend toward the Round Outer Cap, as shown in the inset drawing. Attach the Right Fly Arm (5) in the same manner. 16 5 3 Lubricate Axle 48 Bracket 45 46 6 Axle 45 46 10