Weider Pro 9300 English Manual - Page 14
Cable around a V Pulley 81. Attach the V
View all Weider Pro 9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
28. Identify the Press Cable (87)-this is the 28 longest Cable. Wrap the Press Cable around a 3 1/2" Pulley (82). Attach the Pulley and a Cable Trap (80) to the indicated bracket on the Press Base (13) with a 3/8" x 2" Bolt (50) and a 3/8" Nylon Locknut (42). Be sure that the Cable Trap is turned to hold the Cable in place. Bracket 42 80 13 29. Route the Press Cable (87) under the crossbar on the Press Frame (12). Wrap the Press Cable around a "V" Pulley (81). Attach the "V" Pulley to the lower bracket on the Press Upright (4) with a 3/8" x 2 1/4" Bolt (71) and a 3/8" Nylon Jam Nut (43). 50 82 87 29 4 81 Crossbar 43 71 12 87 30. Route the Press Cable (87) around the indicated 3 1/2" Pulley (82) attached to the Press 30 Frame (12). Be sure that the Cable Trap (80) is turned to hold the Cable in place. Tighten the 3/8" Nylon Locknut (42) and the 3/8" x 3 1/2" Bolt (not shown). 87 82 80 42 12 CABLE ASSEMBLY 14