Weider Pro 9730 English Manual - Page 11

16. Wrap the High Cable (23) around a "V"-Pulley 16 (6). Attach the "V"-Pulley and a Long Cable Trap (50) to the indicated bracket on the Front Upright (42) with a 3/8" x 2 1/2" Bolt (7) and a 3/8" Nylon Locknut (21). Be sure that the Long Cable Trap is positioned to hold the Cable in place. 7 6 50 23 CABLE ASSEMBLY 17. Route the High Cable (23) around the "V"Pulley (6) on the Left Arm (47). Be sure that 17 the Cable is in the groove of the Pulley and that the Long Cable Trap (50) is posi- tioned to hold the Cable in place. Tighten the 3/8" x 2 1/2" Bolt (7) and the 3/8" Nylon Locknut (not shown). 18. Route the High Cable (23) around the "V"Pulley (6) on the Right Arm (48). Be sure 18 that the Cable is in the groove of the "V"- Pulley and that the Long Cable Trap (50) is turned to hold the Cable in place. Tighten the 3/8" x 2 1/2" Bolt (7) and the 3/8" Nylon Locknut (not shown). 42 21 7 50 6 47 23 7 6 23 50 48 19. See the inset drawing. Lubricate the 5/16" x 5" Bolt (68). Attach the Pulley Bracket (20) to the Top Frame (55) with the Bolt and a 5/16" Nylon Locknut (3). The Pulley Bracket must be oriented as shown. Route the High Cable (23) around the 3.1/2" Pulley (15) attached to the Pulley Bracket (20). Be sure that the Cable is in the groove of the Pulley and that the Cable Trap (66) is turned to hold the Cable in place. Tighten the 3/8" x 2" Bolt (12) and the 3/8" Nylon Locknut (not shown). 19 68 55 20 3 11 20 66 12 15 23