Weider Pro 9730 English Manual - Page 19
Press a 1 1/2 Square Inner Cap 32 into
View all Weider Pro 9730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
43. Attach the Large Backrest (41) to the Front 43 Upright (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Washers (10). The Backrest must be oriented as shown. 43 10 41 42 Thick End SEAT ASSEMBLY 44. Press a 1 1/2" Square Inner Cap (32) into the Front Seat Frame (36). 44 Insert the 1/4" x 2 1/4" Carriage Bolt (38) into the center hole in a Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2 1/4" Carriage Bolt (38) into the indicated hole in the Front Seat Frame (36). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4" Washer (10) and the 1/4" x 2 1/4" Screw (82). 13 38 37 32 18 10 36 82 2 19