Weider Pro 9730 English Manual - Page 20
Front Seat Frame to the Front Upright with
View all Weider Pro 9730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
45. Press a 1 1/2" Square Inner Cap (32) into the Leg Lever (29). Lubricate the 5/16" x 2 1/4" Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and a 5/16" Nylon Locknut (3). Do not overtighten the Nylon Locknut. The Leg Lever must be able to pivot freely. Insert the 5/16" x 2" Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16" Nylon Locknut (3) with a 5/16" Washer (8) onto the Eyebolt. 46. Rest the Front Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16" x 2 3/4" Carriage Bolt (14) and the Seat Knob (40). 45 Lubricate-33 35 32 46 36 3 29 8 3 40 36 42 14 Pin SEAT ASSEMBLY 47. Press 3/4" Round Inner Caps (34) into the ends of both Pad Tubes (28). 47 Insert one Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube. Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube. 20 36 30 34 28 34 29 30