Weider Pro 9730 English Manual - Page 18
Seat Assembly
View all Weider Pro 9730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
40. Attach the Small Backrest (80) to the Rear 40 Upright (56) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Washers (10). SEAT ASSEMBLY 80 56 10 43 41. Press a 1 3/4" Square Inner Cap (44) into the Rear Seat Frame (77). Insert the 1/4" x 2 1/2" Carriage Bolt (91) into the center hole in a Seat Plate (37). Attach the Seat Plate to a Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2 1/2" Carriage Bolt (91) into the indicated hole in the Rear Seat Frame (77). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Rear Seat Frame (77) with a 1/4" Washer (10) and a 1/4" x 2 1/2" Screw (43). 42. Align the holes in the Rear Seat Frame (77) with one set of holes in the Rear Upright (56). Attach the Rear Seat Frame to the Rear Upright with a 5/16" x 2 3/4" Carriage Bolt (14) and a Seat Knob (40). 41 91 37 44 18 2 10 13 77 43 42 40 77 14 56 18