Weider X2 Uk Manual - Page 12

mm Bolt 59 and an M10 Nylon Locknut 60.

Get Weider X2 PDF manuals and user guides View all Weider X2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

18. Route the end of the High Cable (48) with the loop 18 down through the indicated slot in the Top Frame (6). Wrap the High Cable around a 90mm Pulley (50) in the direction shown. Attach the Pulley inside the welded bracket on the Top Frame (6) with an M10 x 45mm Bolt (59) and an M10 Nylon Locknut (60). 48 60 50 Slot 59 6 19. Wrap the High Cable (48) around a 90mm Pulley (50) 19 in the direction shown. Attach the Pulley and two Pulley Covers (28) to the indicated holes in the Pulley Plates (25) with an M10 x 50mm Bolt (54) and an M10 Nylon Locknut (60). 20. Wrap the High Cable (48) around a 90mm Pulley (50) 20 in the direction shown. Attach the Pulley and two Pulley Covers (28) inside the welded bracket under the Top Frame (6) with an M10 x 50mm Bolt (54) and an M10 Nylon Locknut (60). 21. Attach the loop on the end of the High Cable (48) 21 inside the Adjustment Tube (14) with an M8 x 35mm Bolt (68) and an M8 Nylon Locknut (70). 12 54 48 50 25 28 60 25 60 6 28 54 50 28 48 48 14 70 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
12
18. Route the end of the High Cable (48) with the loop
down through the indicated slot in the Top Frame (6).
Wrap the High Cable around a 90mm Pulley (50) in
the direction shown. Attach the Pulley inside the
welded bracket on the Top Frame (6) with an M10 x
45mm Bolt (59) and an M10 Nylon Locknut (60).
18
48
19. Wrap the High Cable (48) around a 90mm Pulley (50)
in the direction shown. Attach the Pulley and two
Pulley Covers (28) to the indicated holes in the Pulley
Plates (25) with an M10 x 50mm Bolt (54) and an
M10 Nylon Locknut (60).
19
Slot
25
28
25
60
50
48
20. Wrap the High Cable (48) around a 90mm Pulley (50)
in the direction shown. Attach the Pulley and two
Pulley Covers (28) inside the welded bracket under
the Top Frame (6) with an M10 x 50mm Bolt (54) and
an M10 Nylon Locknut (60).
20
28
50
60
28
48
6
54
21. Attach the loop on the end of the High Cable (48)
inside the Adjustment Tube (14) with an M8 x 35mm
Bolt (68) and an M8 Nylon Locknut (70).
21
68
48
70
14
59
50
6
60
54