Weider X2 Uk Manual - Page 8
the Top Frame 6. Hold the Top Frame on the Rear
View all Weider X2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Press a 50mm Square Inner Cap (37) into the end of the Top Frame (6). Hold the Top Frame on the Rear 5 Upright (5) and the Front Upright (4). Make sure that the Weight Guides (13) are in front of the indicat- ed brackets on the Top Frame. Attach the Top Frame (6) to the Front Upright (4) with an M10 x 70mm Bolt (57) and an M10 Nylon Locknut (60). Attach the Top Frame (6) to the Rear Upright (5) with two M8 x 70mm Carriage Bolts (64), a 50mm x 102mm Support Plate (21), and two M8 Nylon Locknuts (70). Fully tighten all Nylon Locknuts used in steps 2 and 3. 6 6. Attach one Weight Guide (13) to the indicated bracket on the Top Frame (6) with an M8 x 38mm Bolt (67), an M8 Flat Washer (72), and an M8 Nylon Locknut (70). Attach the other Weight Guide to the Top Frame in the same manner. Press a 25mm Round Inner Cap (41) into the top of each Weight Guide (13). 64 6 Brackets 21 60 57 4 13 6 37 70 5 41 70 72 67 Bracket 7. Align the upper bracket on the Seat Frame (7) with 7 the indicated hole in the Front Upright (4). Attach the Seat Frame with an M8 x 65mm Bolt (66) and an M8 Nylon Locknut (70). Attach the lower bracket on the Seat Frame (7) to the Front Upright (4) with an M8 x 65mm Bolt (66), an M8 Flat Washer (72), and an M8 Nylon Locknut (70). 13 4 70 66 7 70 66 72 8