Whirlpool KDSS907SSS Installation Instructions - Page 13

Power Supply Cord Electrical Connection - U.S.A. Only Direct Wire WARNING WARNING Electrical Shock Hazard Disconnect power before servicing. Use a new 40 amp power supply cord. Plug into a grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Disconnect power. 2. Remove the terminal block cover screws located on the back of the range. Pull cover down and toward you to remove cover. ■ Feed the power supply cord behind the black horizontal cross brace and through the strain relief, allowing enough slack to easily attach the wiring to the terminal block. A B A. Hold-down screws B. Terminal block cover 3. Add strain relief. Style 1: Power supply cord strain relief ■ Remove the knockout for the 40-amp supply cord. ■ Assemble a UL listed strain relief in the opening. A B A. Black horizontal cross brace B. Power supply cord ■ Tighten strain relief screw against the power supply cord. A A. UL listed strain relief 13