Whirlpool WEG730H0DS Installation Guide - Page 5

Mobile Home - Additional Installation Requirements The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes. In Canada, the installation of this range must conform with the current standards CAN/CSA-A240-latest edition, or with local codes. Mobile home installations require: ■ When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above. Product Dimensions This manual covers several models. Your model may appear different from the models depicted. Dimensions given are maximum dimensions across all models. Model KSGB900 B C A D E F A. 1 3.0 cm) height from cooktop to top of vent B. 29⁷⁄₈" (75.9 cm) C. Model/serial number plate (located behind the oven door on the top right-hand side of the oven frame) D. 36" (91.4 cm) height to top of cooktop edge with leveling legs screwed all the way in* E. 28 71.9 cm) max. depth from front of console to back of range. F. 28⁷⁄₈" (73.3 cm) max. depth from handle to back of range. IMPORTANT: Range must be level after installation. Follow the instructions in the "Level Range" section. Using the cooktop as a reference for leveling the range is not recommended. *Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs. 5