Xerox 3100MFP/S Dect Phone User Guide - Page 30

SETTINGS On the multifunction terminal: Put the terminal in registration mode: 891 - ADVANCED FCT / DECT / REGISTER On the machine, press , enter 891 using the keypad and confirm with OK. The machine starts searching for the handset. During the registration process (up to one minute), the LCD screen displays HANDSET REGISTRATION. The message disappears once registration is complete. If the registration process fails (for example, the handset left the registration mode too soon), the machine emits a 3-beep signal. In this case, repeat the procedure from step 1. The new handset and the base are mutually searching for each other. The registration may take several seconds. Once the handset is registered, the handset automatically exits the registration mode and lets you know the registration is done. You can also set your base to the registration mode using a handset already registered by selecting the Registration function in the menu SETTINGS/ADVENCED SET./SET BASE. Modifying the terminal preference This function enables you to specify which base will be used by your handset to make calls (if your handset is registered to several bases). On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. Select ADVANCED SET.. Press Valid. . Select SET HANDSET. Press Valid. . Select BASE PRIORITY using Press Valid. . or . An information screen presents the current base preference for your handset. • To keep the preference, press Valid. . • To modify the preference, press Edit . A list provides the bases among which you can choose the preferred base to which you want your handset to be registered. With the automatic mode you are not required to specify the preference. Select the base preference using Press Valid. . or . To exit the menu, press the red key . 31