Xerox 3100MFP/S Dect Phone User Guide - Page 31

SETTINGS Resetting the handset When you reset your handset, all the parameters are reset to their initial value (factory settings) with the exception of the phonebook and alarms (birthdays and organiser). On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. Select ADVANCED SET.. Press Valid. . Select SET HANDSET. Press Valid. . Select PERSON. REGISTR using Press Valid. . or , Select ADVANCED SET.. Press Valid. . Select SET HANDSET. Press Valid. . Select RESET HANDSET using or . Press Valid. . A confirmation screen will prompt you to confirm your request: • To re-initialise your handset, press Yes . • If you do not wish to re-initialise your handset, press No . To exit the menu, press the red key . Personal registering To register a handset in the following cases: • the base's code is no longer 0000 (you have customised the code), • you own several bases, • you want to choose a name for your base (name displayed on the welcome screen), • you want to choose the handset registration number. Select the required base number. Press Valid. . Delete the current base name using C key (if necessary). Enter the new name, press Valid. . Enter the base code. Press Valid. . The handset enters the registration mode, "HANDSET IN REGISTR. MODE" is displayed on the screen. Put the base to which you want to register the handset in registration mode. Once the handset is registered, select the required handset number. Press Valid. . On the multifunction terminal: Put the terminal in registration mode: 891 - ADVANCED FCT / DECT / REGISTER On the machine, press , enter 891 using the keypad and confirm with OK. The machine starts searching for the handset. 32