Xerox 5400DX Network Guide - Page 15
Quick install steps (Xerox TCP/IP Port Monitor), Printer driver installation
UPC - 042215476539
View all Xerox 5400DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
23. If your print job did not print, see the Troubleshooting section for your operating system in the Advanced Features and Troubleshooting Manual to correct the problem. Note Printers connected to a Windows NT network with the TCP/IP protocol enabled, can use a web browser to monitor and configure your printer. Refer to the section in this document entitled Internet Printer Services. Note For installing or managing multiple printers on a Windows NT network with the TCP/IP protocol enabled, you can use the Xerox CentreWare MC snap-in to Microsoft Management Console. Refer to the Xerox CentreWare MC User Guide. Quick install steps (Xerox TCP/IP Port Monitor) 1. Insert your printer's CD-ROM into your computer's CD-ROM drive. A CD Navigator Utility should automatically start. If it does not start, then: a. Click Start and Run. b. In the Run window, type: :\SETUP32.EXE. 2. Select your desired language from the available list. Printer driver installation 1. Install the printer drivers for your printer. Within CD Navigator, select Printer Drivers, and then select Install Xerox Phaser 5400 Laser Printer Drivers. Note The Xerox TCP/IP Port Monitor has not been installed yet. It is necessary to temporarily install the printer drivers to an alternate port. A local port, such as LPT1, is recommended. Quick Network Install Guide 9