Xerox 5400DX Network Guide - Page 17
Quick install steps (AppleTalk protocol
UPC - 042215476539
View all Xerox 5400DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
In the Add Xerox TCP/IP Port window: a. Under Enter a Port Name, enter a unique name for the port being added. b. Under Enter a printer name or IP address, enter the printer's host name or IP Address. c. Click Next. Note To locate Xerox printers on your local area network, select Auto Printer Discovery, and then click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printers and displays them in a list. Select your desired printer from the list and click OK. 6. After all the port settings have been configured and verified, a Completing dialog box appears summarizing all of the settings. You have the opportunity to change any of the settings by clicking the Back key. Otherwise, click the Finish key to complete the port setup. 7. Click OK to exit from Printer Properties. This completes the installation of the Xerox TCP/IP Port. Quick install steps (AppleTalk protocol) 1. At the Desktop, right-mouse-click the Network Neighborhood icon and select Properties. 2. Click the Protocols tab and verify that the AppleTalk protocol has been loaded. 3. If the AppleTalk software is not present, install it using the documentation provided by Microsoft, and then return to this document. 4. Open the Control Panel and double-click the Printers icon. 5. Double-click Add Printer; the Add Printer Wizard starts. 6. Verify that My Computer is selected and click Next>. 7. Click Add Port. 8. Select the AppleTalk Printing Devices and click New Port. 9. Click Ethernet and select the device. Quick Network Install Guide 11