Xerox 5400DX Network Guide - Page 35

For Phaser networked printers Static addressing The printer is assigned a TCP/IP address by a network administrator and this address is manually input to the printer. Perform the steps below: 1. Press Menu Up or Menu Down until you see: Menu Ethernet Menu 2. Press Item Up or Item Down until you see: Ethernet Menu IP Address Res. 3. Press Value Up or Value Down until you see: IP Address Res. = Static * 4. Press Enter. 5. Press Item Up or Item Down until you see: Ethernet Menu IP Address 6. Press Value Up or Value Down until you see: IP Address = xxx.xxx.xxx.xxx 7. Use Value Up or Value Down to increment the underlined value in the IP Address by 1 each time the key is pressed. Holding down Value Up or Value Down causes continuous scrolling through the values. 8. Use Item Up or Item Down to scroll left or right respectively through the positions of the IP Address and repeat Step 4 above until you have completely selected the IP Address. 9. Press Enter to set the IP Address after you have completed selecting it. 10. Reset the Printer to have the new settings take effect. Quick Network Install Guide 29