Xerox 6130N User Guide - Page 90
System Setup - toner for
UPC - 095205735475
View all Xerox 6130N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Description of Menu Items System Setup System Setup menu is used to make the printer operation settings, such as for alarm and power saver mode. Item PowerSaver Timer Audio Tone Time-Out Panel Language Auto Log Print Description Specify the transitional time to Power Saver between 5 and 60 minutes in increments of 1 minute. ■ 5 min. to 60 min. (default: 30 min.) ■ For details, refer to Power Saver Mode on page 2-8 Specifies whether to turn on the alarm when an error occurs in the printer. You cannot adjust the sound volume. ■ Control Panel (default: Off) ■ Invalid Key (default: Off) ■ Machine Ready (default: Off) ■ Job Complete (default: Off) ■ Fault Tone (default: Off) ■ Alert Tone (default: Off) ■ Out of Paper (default: Off) ■ Low Toner Alert (default: Off) ■ Base Tone (default: Off) You can cancel a printing process when it goes beyond a set time period. Set the time until the print job is canceled. When this timeout expires, the print job is canceled. ■ 5 sec. to 300 sec. (default: 30 sec.) Specifies the amount of time in increments of 1 second the printer waits for additional data before it cancels the job. ■ Off Cannot cancel. Specifies the language that is displayed on the control panel and Information pages. Specifies whether to automatically print information about the printed data that has been processed in the printer (Job History Report). ■ Off (default) Select this if you do not want to print the Job History Report automatically even if the number of print jobs exceeds 22. ■ On Automatically prints a report when the number of print jobs reaches 22. ■ You cannot set this during printing. ■ You can print the Job History Report from the Information Pgs menu. ■ You need to restart the printer to activate the new settings. After making the settings, turn off the printer and then turn it on again. Phaser® 6130 Printer 5-9