Xerox 8560DN Advanced Features Guide - Page 61
Setting the Duration for the Tray 1 Prompt, Address, Properties, General, Printer Defaults
UPC - 095205733280
View all Xerox 8560DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Printer Settings Setting the Duration for the Tray 1 Prompt The Tray 1 prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in the tray. The Tray 1 prompt requests the user to confirm the current tray setup or to specify the correct paper type and size for the print job. Duration None (Factory default setting) 30 Seconds Infinite Behavior Turns the tray setup prompt off. Displays the tray setup prompt for 30 seconds after paper is loaded in Tray 1. Displays the tray setup prompt after paper is loaded in Tray 1 until a control panel selection is made. To select a Tray 1 prompt setting, use one of the following options: ■ The printer's control panel ■ CentreWare IS Using the Control Panel To select the Tray 1 prompt setting on the control panel: 1. Select Printer Setup, and then press the OK button. 2. Select Paper Handling Setup, and then press the OK button. 3. Select Tray 1 Prompt, and then press the OK button. 4. Select the appropriate duration, and then press the OK button. Using CentreWare IS To select the Tray 1 prompt setting using CentreWare IS: 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the General folder on the left navigation panel, and then select Printer Defaults. 5. Select the appropriate setting in the Tray 1 Prompt drop-down list. 6. Click the Save Changes button at the bottom of the page. Phaser® 8560 Color Printer 4-11