Xerox N2125 User Guide - Page 124
Jam Scenario 2, Exit Jam, Open Rear Cover, Clear Paper Path - fuser
UPC - 095205010176
View all Xerox N2125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Paper Jams Jam Scenario 2 A paper jam has occurred at the exit path to the output bin. Control Panel Message Exit JamOpen Rear Cover Corrective Action 1 Go behind the printer, squeeze the latch on the top left of the rear cover and pull the cover open. Clear Paper Path 2 Remove any jammed paper. Be careful not to touch the fuser. It becomes very hot from printing. 3 Close the printer's rear cover. 4 Check the Control Panel display. If the jam has been cleared and all covers are closed, the display will show Ready. If a paper jam message remains, there is still paper jammed in the printer. Refer to Table 5.1 on page 5-6 for instructions. 5-10 y User Guide
Paper Jams
5-10
User Guide
Jam Scenario 2
A paper jam has occurred at the exit path to the output
bin.
Control Panel Message
Corrective Action
Exit Jam-
Open Rear Cover
1
Go behind the printer, squeeze
the latch on the top left of the
rear cover and pull the cover
open.
Clear Paper Path
2
Remove any jammed paper.
Be careful not to touch
the fuser. It becomes
very hot from printing.
3
Close the printer’s rear cover.
4
Check the Control Panel display.
If the jam has been cleared and
all covers are closed, the display
will show
Ready
. If a paper jam
message remains, there is still
paper jammed in the printer.
Refer to Table 5.1 on page 5-6 for
instructions.