Yamaha 02R Owner's Manual - Page 202
AUX7 and AUX8
View all Yamaha 02R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
92 Internal Effects AUX 7 and AUX 8 1. Press the [AUX 7] button. AUX 7 EFF1 The AUX 7 display function appears. 2. Select a channel using the [SEL] buttons or the cursor buttons. 3. To turn the send on, press the [ON] button in the AUX group of the SELECTED CHANNEL controls. The LED inset in the button illuminates. The AUX functions for AUX 7 and AUX 8 set the channel send levels to either of these effects buses. Similar to the functions for AUX 1 through AUX 6, you select an effect bus and then set the levels of a group of input channels. You can also select whether to send the signals pre or post fader. Fader Status When the AUX functions are selected, the faders change from channel level controls to auxiliary send level controls. The faders automatically move to the corresponding auxiliary send levels. Note: Avoid blocking the fader movements when the faders relocate to their auxiliary send positions by placing objects on the 02R. It is possible to damage the faders. The AUX LED of the FADER STATUS indicator will illuminate to indicate the fader status. The number indicator corresponding to current the AUX button is also illuminated: Note: The [ON] button is FADER STATUS the only way to turn the send INPUT on or off. AUX 4. To change the aux send 1234 5678 from pre to post-fader, press the [ENTER] button. The icon is highlighted in reverse video and the text changes to POST when the signal is post The send levels for the input channels are operated by their faders. Press the [FLIP] button, and the send levels for the tape return channels can be operated by the faders. You can also use the rotary encoders to set the tape return levels. The effect return levels can only be adjusted with the rotary encoders. fader. Note: When you press the [FLIP] button, the faders will automatically move to Note: Pre or post fader selection can only be made from the display function. the levels of the opposite channels (from input levels to tape return levels). Avoid blocking the fader movements when the faders reposition by placing objects on the 02R. It is possible to damage the faders. 5. To change the signal level, adjust the fader or rotary encoder until the desired value is obtained. Note: AUX 7 and AUX 8 are identical. SELECTED CHANNEL Controls You can use the SEND LEVEL encoder in the AUX group of the SELECTED CHANNEL controls to set the signal level to the auxiliary bus. The method of working with these controls is different than working with the DISPLAY ACCESS - AUX buttons. Select a channel with the [SEL] buttons. Select the auxiliary bus with the [AUX1] through [AUX8/EFF2] buttons. Turn the send on or off with the [ON] button. Adjust the send level with the SEND LEVEL encoder. Digital Recording Console 02R User's Guide SEND LEVEL