Yamaha 02R Owner's Manual - Page 66
Using the Dynamics Library, Recalling Dynamics Programs
View all Yamaha 02R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Secondary Recording Tutorial 57 Using the Dynamics Library Once you have applied a dynamics processor to the stereo bus, you need to know how to recall dynamics programs from the library and to adjust the parameters to create your own dynamics programs. DYNAMICS Recalling Dynamics Programs 1. Press the [DYNAMICS] button again. The DYNAMICS Library display screen appears: You can also select the LIB icon with the CURSOR buttons and press the [ENTER] button. 2. Use the CURSOR buttons to select the RECALL icon. Rotate the encoder wheel to select a dynamics program. The 02R will scroll through the available dynamics programs. The program that is highlighted is the program that will be recalled when you press the [ENTER] button. 3. Press the [ENTER] button. The dynamics program is recalled. If you attempt to recall a user program that is empty, the 02R will flash an error message, indicating that the selected memory location is not available for recall. Note: Unlike EQ and effects, it is sometimes essential to apply a dynamics processor to an input signal as you are recording multitrack sources. Some signals are too unpredictable or noisy to record without some form of compression or gating. However, you should be very selective about the dynamics you apply, as the same rule holds: it is easy to add the effect, but very difficult to remove it afterwards. Digital Recording Console 02R Getting Started Guide