Yamaha 02R Owner's Manual - Page 266
Input Signal Select, Signal Select screen
View all Yamaha 02R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
156 Digital I/O, Setup, and Utilities Input Signal Select 1. Press the [DIGITAL I/O] button. DIGITAL I/O A DIGITAL I/O display function appears. You may have to press the [DIGITAL I/O] button repeatedly to get to the "Input Signal Select" screen. 2. Use the CURSOR buttons to select the desired control icons. Change the setting by pressing the [ENTER] button. The 02R has 24 built-in analog input connectors; the individual input channels (MIC/LINE 1 through 16) and the stereo input channels (LINE 17/18 through 23/24). You can route two of the 2-track digital inputs to the stereo input channels (2TR IN D1 to LINE 17/18 and 2TR IN D2 to LINE 19/20). You can also convert the individual input channels (MIC/LINE 1 through 16) to tape return channels, allowing you to perform 32-track mixdowns with the 02R. Display Screen Shown below is the second DIGITAL I/O display function - the Input Signal Select screen: Note: If there is no digital I/O card or signal present when you select a digital input, the default analog selection will not be changed. There are four boxes on this screen: The first box is for MIC 1-8 (MIC/LINE 1 through 8). You can select "CARD SLOT 3" or "INT ANALOG" (the default). If there is no digital I/O card in slot 3, the selection will fail. The second box is for MIC 9-16 (MIC/LINE 9 through 16). You can select "CARD SLOT 4" or "INT ANALOG" (the default). If there is no digital I/O card in slot 4, the selection will fail. The third box is for LINE 17/18. You can select "2TR-IN D1" or "INT ANALOG" (the default). If there is no digital signal (no wordclock present) at the 2TR IN DIGITAL connector #1, the selection will fail. The fourth box is for LINE 19/20. You can select "2TR-IN D2" or "INT ANALOG" (the default). If there is no digital signal (no wordclock present) at the 2TR IN DIGITAL connector #2, the selection will fail. Note: You cannot select 2TR-IN D1 or 2TR-IN D2 for digital input/output if the corresponding switch (2TR-D1 or 2TR-D2) for either connector has been selected with the CONTROL ROOM monitor switches. Digital Recording Console 02R User's Guide