Yamaha 02R Owner's Manual - Page 51
Auxiliary Send Channels, DISPLAY ACCESS - AUX buttons, SELECTED CHANNEL - AUX controls
View all Yamaha 02R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
42 Secondary Recording Tutorial Auxiliary Send Channels AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 EFF1 AUX AUX 8 EFF2 AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 EFF1 AUX 8 EFF2 SEND LEVEL ON AUX The Digital Recording Console 02R has eight auxiliary send channels. AUX7 and AUX8 are used to feed the internal effects processors, with the signal remaining entirely in the digital domain. The other auxiliary sends - AUX1 through AUX6 - can be used to feed external signal processors and effects units, foldback amplifiers, or multitrack recording equipment. AUX5 and AUX6 can also be used to construct a monitor mix and routed directly to either the studio or control room monitors. When a send is used to feed an external effects processor, the processed signal can be returned via one of the stereo input channels or an unused input channel. There are two different ways to access the auxiliary send channels: DISPLAY ACCESS - AUX buttons These buttons access the Display Functions that set the auxiliary send levels for the recording console. • The [AUX 1] to [AUX 6] buttons set the auxiliary send levels to the corresponding auxiliary bus. You can also select whether to send the signal pre or post fader. • The [AUX 7] and [AUX 8] buttons also set the send levels to the corresponding auxiliary bus and can be sent pre or post fader. These two sends are routed to the internal effects unit. Therefore, the buttons also allow you to select and set the effects parameters. When you press any one of these buttons, the faders switch from controlling the input levels to controlling the auxiliary send levels. SELECTED CHANNEL - AUX controls These buttons and controls set the auxiliary send levels for the currently selected channel. • The [AUX 1] to [AUX 8] buttons allow you to select the auxiliary buses you want to send the selected channel signal to. • The SEND LEVEL rotary encoder is used to set the level - indicated by the adjacent LED bargraph. • The [ON] button is used to turn the send on or off. Digital Recording Console 02R Getting Started Guide