Yamaha 02R Owner's Manual - Page 302

192 Specifications Specifications Specifications General Specifications Number of scene memories Sampling frequency Signal delay Fader resolution Total harmonic distortion (THD) Frequency response Dynamic range Hum & Noise (20 Hz to 20 kHz) *, Rs = 150Ω, Input gain max. Input pad = 0 dB Input sensitivity = -60 dBv Maximum Voltage Gain Crosstalk(@1kHZ) 64 Internal 44.1 kHz, 48 kHz External (32 kHz -6%) to (48 kHz +6%) Less than 2.5 ms. MIC/LINE input to STEREO output. +10 to -90, -∞ dB (128 steps/100 mm ) input faders. 0 to -120, -∞ dB (128 steps/100 mm ) stereo fader. Less then 0.2%, 20 Hz to 20 kHz (analog output) @+14 dB into 600Ω. +1, -3 dB, 20 Hz to 20 kHz @+4 dB into 600Ω . 110 dB typical D/A Converter (STEREO OUT). * 105 dB typical A/D to D/A (MIC/LINE IN to STEREO OUT). * -128 dB Equivalent input noise. -88 dB residual output noise. STEREO OUTPUT. STEREO OUTPUT off. -88 dB (92 dB S/N) STEREO OUTPUT. Master fader at nominal level and all channel faders at minimum level. -64 dB (68 dB S/N) STEREO OUTPUT. Master fader at nominal level and all channel faders at nominal level. 74 dB MIC/LINE (1 through 16) IN to STEREO OUT 74 dB MIC/LINE (1 through 16) IN to AUX SEND 1, 2, 3, 4, 5, 6 (via PRE INPUT FADER) 74 dB MIC/LINE (1 through 16) IN to MONITOR OUT (via STEREO bus) 54 dB LINE (17 through 24) IN to STEREO OUT 70 dB adjacent input channels. 70 dB input to output. * Hum & Noise are measured with a 6 dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with an infinite dB/octave attenuation. * Sampling Frequency: Internal 48 kHz Digital Recording Console 02R User's Guide